The Programmable Dimmer by Tribe of PHOTONS

Instructions to Set up Programmable Dimmers

To operate the dimmer in manual mode

Adjust light output % with manual mode

1. Click FUNC, use ↑↓ to navigate options to Set Brightness and click SET to select.
2. Use ↑↓ to select % and click SET for desired brightness.
3. Repeat step 1 & 2 to manually make adjustments.

To set up the dimmer to run in programmable mode

Set Clock

1. Click FUNC, use ↑↓ to Set Clock and click SET.
2. Use ↑↓ to adjust time to current time and click SET.

Programmable Mode

1. Set up the clock.
2. Set up schedules with time frames and correlated light output percentage.
3. Review the schedules to make sure whole 24 hours light output is set up properly.
4. When the green light blinks on PROG., it is running on the program mode.

Set up Program Schedules in 24 hours cycle

1. Click FUNC. the use ↑↓ to navigate options to Set Program click SET.
2. Use ↑↓ to navigate options to Schedule Setting then click SET.
3. Use ↑↓ to select % and correlated time frame to complete 24 hours cycle.

Turn on Program

1. Click FUNC. ↑↓ to Function Menu Set Program click SET.
2. Use ↑↓ to navigate options to Program Schedule ON/OFF, click SET, Schedule ON click SET.
3. When the program indicator light starts to blink, the program is set and on.

 

To set up 12 hrs-on & 12 hrs-off Sunrise/Sunset Schedule

00:00 – 07:00 → 0%

07:00 – 08:00 → 30%

08:00 – 09:00 → 50%

09:00 – 10:00 → 80%

10:00 – 16:00 → 100%

16:00 – 17:00 → 70%

17:00 – 18:00 → 40%

18:00 – 19:00 → 20%

19:00 – 00:00 → 0%